Flat dryer
The flat-plate dryer is a kind of Grain drying and transportation equipment. The flat-plate dryer can be used for both the drying of billets and the softening of oil. It can replace the commonly used steaming pans and drums with lower energy consumption. Type dryer completes the drying and steaming work. In the extraction project, the plate dryer is a drying equipment for oil. It is a drying equipment specially used to dry the moisture in soybean embryos in the new soybean extraction process. It has strong moisture removal ability, smooth operation, safety and reliability and can maintain the integrity of soybean embryo pieces. The ideal drying is not prepared.
Flat dryer The flat-plate dryer is a kind of grain drying and transportation equipment.. The flat-plate dryer can be used for both the drying of billets and the softening of oil. It can replace the commonly used steaming pans and drums with lower energy consumption. Type dryer completes the drying and steaming work. In the extraction project, the plate dryer is a drying equipment for oil. It is a drying equipment specially used to dry the moisture in soybean embryos in the new soybean extraction process. It has strong moisture removal ability, smooth operation, safety and reliability and can maintain the integrity of soybean embryo pieces. The ideal drying is not prepared. Features 1. Continuous operation, large production capacity; 2. The resistance of the hot air through the cylinder is small, and the energy consumption is low; 3. Great operation flexibility and strong adaptability to materials; 4. Stable operation, few failures, low maintenance cost and long service life; 5. By adding vibrating and breaking devices, it can be suitable for viscous materials. Flat dryer Through the function of the flat-plate dryer, the moisture in the oil can be conveniently controlled within the predetermined index range, to avoid mold and heat sprouting during the storage of the oil, so that the once-leached blanks can reach the qualified immersion moisture, so The dissolved cake reaches the safe moisture index to facilitate the next storage and transportation and feed processing. It has even been reported that the plate dryer is used for steaming and frying in the rapeseed pre-pressing process. In short, as long as the process parameters are properly selected and accurate process calculations are made, the realization of different process intentions can be effectively ensured, and at the same time, the manufacturing costs and operating costs of the equipment are reduced, thereby improving the working efficiency of the entire drying process. The structure and working principle of the flat plate dryer is that the bottom interlayer is fed with steam (pressure is 0.3 ~ 0.5MPa), the material falls into the uppermost flat plate from the feed port, and moves at a uniform speed under the push of the scraper (linear speed 1.2 ~ 1.5m / min), falling into the lower layer at the end, moving in the opposite direction of the lower layer, so that horizontal movement and falling layer by layer until the bottom discharge. The residence time of the material in the machine is 30min. In this process, the material is heated by the steam in the bottom interlayer, the material absorbs heat to a certain temperature, and the moisture in the material changes phase and vaporizes and is discharged from the exhaust port. , Discharged from the condensate outlet at the bottom of the interlayer.
Contact Us
We not only provide a good product, but also provide high quality service.If you are interested in
our products, you can contact us in the following ways.
.jpg)
